- HF/Heat Welding Machines
- Cutting/Laser Plotters
- Other Machines
ORMA vacuum forming machines are dependable and easy to use. Forming can be produced efficiently and economically even with small or large batch sizes. The uniform wall thickness is achieved by the use pre-blowing in positive forming and pre-stretching technology in negative forming. The production process combines the best aspects of both pressure forming and vacuum forming technologies: exceptional precision and speed.
ORMA thermoforming machines produce uniform, high quality plastic packages and articles made from roll-fed thermoplastic materials like OPS, PVC, PET and other thermoformable films.
he PLC controlled automated functions allow for shortest cycles times and optimum contour definition. The robust design of all highly-stressed elements ensures continuous operation with constant availability and long-term production performance.
epending on production demands machines are equipped with special designed finishing modules. Each thermoforming machine can be equipped with automatic foil feeder which allows usage of heavier foil weight. Especially dedicated to work with FPP and FPN modules.
|MODEL||FP 57||FP 69||FP 69|
|Forming area||500 x 700 mm||670 x 670 mm||670 x 970 mm|
|Film width||540 mm||700 mm|
|Positive/negative forming||+ / +|
|Max. height of pos/neg forming||150/150 mm||150/140 mm||150/120 mm|
|Table stroke||300 mm|
|Installed power||~10 kW||~15 kW||~20 kW|
|Power supply||400V; 50Hz|
|Efficiency||less then 20 s/cycle||less than 35 s/cycle||less than 45 s/cycle|
|Working pressure||0,4 ÷ 0,8 Mpa|
|Air usage||100 nl/cycle||120 nl/cycle||140 nl/cycle|
|Film thickness||0,2 ÷ 4 mm|
|Film cooling||Air fans|