- HF/Heat Welding Machines
- Cutting/Laser Plotters
- Other Machines
oxmat PRO is the most advanced and universal box making machine revolutionizing the short run and serial production process of corrugated cardboard boxes.
How easy is the production of boxes with Boxmat PRO? All you have to do is to chose a preprogrammed box style and enter the inside box dimensions on a touch screen panel. There is no manual setup at all – all tools (scoring and cutting) are servo driven and set automatically in less than a minute. Other individual design box types are available with an intuitive step-by-step creator in Free Style. Slotting, slitting, scoring/creasing, gluing and printing can be done in just one on one compact machine - without the need for additional modules!
Standard Boxmat PRO is equipped with 10 sectional slotting knives, 4 longitudinal cutting knives plus 4 scoring wheels (max. 8x8) automatically set by the servo-drives to suit the size and thickness of the board. The corrugated cardboard is centrally positioned with auto-guides. Soft grip rollers and solid input/output shafts and double encoders provide precision board feed control and prevent skewing.
The innovative system of Circular Saw Toothed knife blade installed in the rear cutting/scoring section allows for bi-directional board size adjustment without the need for precutting the blanks to the exact size on a separate machine or module. The gluing module incorporated into this section provides on-the-go single or double line cold glue application.
NEW! FLEXOMAT FLEXO PRINTER FOR BOXMAT PRO This add-on unit for Boxmat PRO allow to synchro-print corrugated cardboard boxes directly in one pass after cutting/scoring. FlexoMAT can also work as stand alone flexograpric printer for cardboard.
Our innovative gluing system gives a fresh and exceptional approach to the corrugated cardboard gluing process.
With the double nozzle applicator integrated with a cross-cutting knife we apply glue in the same cycle as trimming the board; saving time and streamlining the box production cycle. The unit is using single or double nozzles for dotted, dashed or continuous glue line application
With the use of optional Multiproduction module you can double your production capacity on the Boxmat PRO machine. The Side-by-Side Multiproduction assembly requires installation of additional center-location slotting knives and upgrading the pneumatic controls and control software.
When fully installed, you can remove the middle slotting knives for a standard production and reinstall them again, if needed, in less then 10 minutes. With Multiproduction machine can deliver up to 1200 standard RSC / 201 boxes per hour.
NEW! The FlexoMAT printing unit integrates inline with Boxmat machines or it can be used as stand alone printer.
Standard configuration has one 800mm (31”) wide print drum/ cylinder which is fully programmable and automatically adjustable across the width of the machine, to print image onto different panels, utilizing the full 2400mm (94”) size.
Optionally, the FlexoMAT can be fitted with a second drum/ cylinder to double the print area or utilize the use of second color.
|Maximum board size:||2400mm (94”) width x unlimited length|
|Minimum board size:||250mm (10”) width x 650mm (25”) length|
|Maximum distance between slotting knives:||2000mm (79”)|
|Minimum distance between slotting knives:||70mm (2 3/4”)|
|Slot width:||8mm (5/16”)|
|Sectional slotting knives:||100mm (4”) each|
|Standard slotting knives length:||500mm (20”) each side|
|Cardboard used:||single and double wall (triple wall per request)|
|Voltage:||3 x 380/440/480V|
|Footprint (L x W x H):||3300 x 1600 x 1600 mm (130 x 63 x 77”)|