- HF/Heat Welding Machines
- Digital Cutters
- Other Machines
ood forming technology (for plywood, MDF boards, floor panels, etc.) with the use of ZEMAT brand Radio Frequency (RF) Generators and custom designed Hydraulic Presses is the best and the most economical solution for manufacturers making short series of products and requiring energy efficient, fast and easy production process.
hanks to the use of RF technology the cost of tooling (moulds) is several times lower than with the use of traditional methods of wood forming. The raw material is places inside the mounted on the press table mould and after closing the high hydraulic pressure is applied. Then the RF frequency is turned on to start the heating process. The RF heating can be roughly compared to that of a microwave oven. Another words the heating take place inside of the molded material not on the surface of the mould. This technology is extremely energy efficient and fast. The average time for forming/gluing process is between 2-20 minutes relative to the thickness and surface of the raw material.
|Power supply||3 x 400V; 50 Hz|
|Installed power||7,5 - 90 kVA|
|Output power||5 - 60 kW|
|Work table length||1200 - 2600 mm|
|Work table width||600 - 2500 mm|
|Total pressure||20 - 200 t|
|Clearance||600 - 100 mm|
|Pistons stroke||300 - 500 mm|
|Number of pistons||1 - 6|
|Surface pressure||5,5 - 6,5 kg/cm2|