press

W

ood forming technology (for plywood, MDF boards, floor panels, etc.) with the use of ZEMAT brand Radio Frequency (RF) Generators and custom designed Hydraulic Presses is the best and the most economical solution for manufacturers making short series of products and requiring energy efficient, fast and easy production process.

T

hanks to the use of RF technology the cost of tooling (moulds) is several times lower than with the use of traditional methods of wood forming. The raw material is places inside the mounted on the press table mould and after closing the high hydraulic pressure is applied. Then the RF frequency is turned on to start the heating process. The RF heating can be roughly compared to that of a microwave oven. Another words the heating take place inside of the molded material not on the surface of the mould. This technology is extremely energy efficient and fast. The average time for forming/gluing process is between 2-20 minutes relative to the thickness and surface of the raw material.

Main features

  • Programmable press time
  • Automatic opening the press after expiration of definite time
  • Safety cut – out switch - barrier around the press
  • Hydraulic system
  • Press force smooth regulated by pressure switch at 15 – 100%
  • Pump efficiency: 60 dm3/min and pressure 2,5 MPa, closing speed of 25 mm/s
  • Pump efficiency 6 dm3/min and pressure 30 MPa gives work pressure up to 25 MPa
  • Surface pressure around 5,5 - 6,5 kG/cms (on 100% of table surface)

Details

  • Warranty: 12 months
  • Approx. delivery time: contact sales department
  • Certificates: CE, EU, EMC, FCC, OSHA
  • Standard color: Grey, RAL7035

Types of collars

  • Forming and gluing bent and glued components made of hardwood veneer, e.g. chair and armchair seats and backrests, armrests
  • Forming and gluing elements from MDF plates, e.g. furniture fronts
  • Preliminary bending elements from solid timber
  • Bending and drying elements from solid timber, e.g. chair, armchair and table elements
  • Drying wooden elements from capillary moisture and moisture after technological processing
  • Laminar gluing of wood, e.g. producing floor panels, plywood producing wooden dressing used in building woodwork

Downloads

Gallery - Machine details


Power supply 3 x 400V; 50 Hz
Installed power 7,5 - 90 kVA
Output power 5 - 60 kW
Work table length 1200 - 2600 mm
Work table width 600 - 2500 mm
Total pressure 20 - 200 t
Clearance 600 - 100 mm
Pistons stroke 300 - 500 mm
Number of pistons 1 - 6
Surface pressure 5,5 - 6,5 kg/cm2

 

CONTACT OUR SALES DEPARTMENT